Filter
Top Products
Instruction Manual
4
Installation and Connections
Please follow the step-by-step process below to complete the connection of all peripherals -
IMPORTANT:
Please install the driver and application from the CD before connecting the Capture Box!
TV RF Cable
1. Connect the TV RF Cable
to the TV Tuner Port on the
rear of the Capture Box
TV Tuner
Port
2. Connect the AV Combined jack to
the AV In Port on the rear of the
Capture Box
3. Connect the Composite Video (Yellow), Audio
L (White) and Audio R (Red) connectors to the
corresponding connectors from your video device
4. Alternatively, if your
video device is suitably
equipped, you can use the
S-Video connection
AV In Port