Filter
Top Products
Instruction Manual
5
5. Connect one end
of the Audio Cable to
the Audio Line Out
Port on the side of
the Capture Box.
Connect the other
end to the Line In
Port on your PC
6. Make sure your
PC has speakers
connected!
7. Connect the USB 2.0 cable to the USB
Out Port on the Capture Box and to an
available USB 2.0 Port on your PC
8. Connect the USB to DC Power Cable to
the DC-In Port on the Capture Box and to a
USB port on the PC
10. Make sure the IR Remote Controller is aimed
directly at the LED detection window when using
it to control the Capture Box
9. Use the SNAP button to
take a snapshot picture
Audio Line
Out Port
To PC’s Line In Port
Speaker Output
USB Out Port
DC In Port
SNAP button