Filter
Top Products
23 -
Daily operation
Explanations of the sound settings:
Selection possibility Mono/Stereo or Sound 1 or Sound
2 for two-sound broadcasts separately for speakers and
headphones. Only available with analogue stations.
Reduces volume differences, e.g. for advertisements that
are too loud.
Sound selection for two sound broadcasts.
Determining the maximum volume that can be set.
Specify the volume that is set when switching on the TV
set with the power switch.
If the volume is higher when switching the TV set to the
standby mode than specified here, then it is reduced
automatically to the fixed maximum switching on volume
when it is turned on again.
The volume can differ according to the individual stations.
If the sound is too loud or too quiet in relation to other
stations, adapt the volume. When the menu is open, you
can select the stations one after another with P+/P– and
adjust every single station conveniently.
Set stereo balance so that the volume impression is identi-
cal on the left and right.
If the automatic speech detection is activated, the sound
of the current programme is automatically output with
optimum comprehensibility when speech is detected.
more ...
Loudspeaker/
Headphone
sound
Auto volume
AV output
signal
Maximum
volume
max. switch on
volume
Volume
adjustment for
current station
Balance
Auto speech
detection
Downloaded From TV-Manual.com Manuals