Loewe ConceptL32Basic Flat Panel Television User Manual


 
33 -
Operating additional equipment
Connecting other audio ampliers or active
speakers
In the connection wizard, select “HiFi/AV amplier” under “Equipment selec-
tion: audio component”. The connection wizard allows conguration of different
audio ampliers (stereo ampliers, surround ampliers, analogue or digital) with
different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the
operating instructions for the audio amplier to be connected.
Select “Digital“ under “Audio transmission“ for digital audio ampliers. Con-
nect the digital audio output of the TV AUDIO DIGITAL OUT to the digital audio
input of the digital amplier.
Assign the digital audio input to the socket through which the corresponding
picture is transmitted (e.g. AV2 if a DVD player is connected there). Then the
digital sound is passed to the digital audio output of the TV set and fed to the
external audio amplier via this.
Specify which sound formats can be decoded with your digital amplier (Dolby
Digital, MPEG, dts).
Specify under “Type of amplier“ whether the digital amplier is a stereo or
surround amplier.
If it is a surround amplier, specify whether or not the TV loudspeakers are to be
used as centre loudspeakers. Connect the centre output of the amplier to the
centre output of the TV using a cinch cable, if necessary.
Note: do not use the centre loudspeaker connection on the amplier; instead
use the pre-amplier centre output.
Select “Analogue“ for “Sound transmission“ for analogue audio ampliers.
The sound for the analogue amplier is transmitted via the AUDIO OUT L/R con-
nections of the TV to the audio amplier. Connect the amplier with two cinch
cables.
Specify under “Type of amplier“ whether the analogue amplier is a stereo or
surround amplier.
If it is a surround amplier, also specify whether or not the TV speakers are to be
used as centre loudspeakers. Connect the centre output of the amplier to the
centre output of the TV using a cinch cable, if necessary. Note: do not use the
centre loudspeaker connection on the amplier; instead use the pre-amplier
centre output.
If you want to listen to the sound via the TV loudspeakers temporarily, call the
Sound menu using the button, select “Sound via“ and then “TV“.
When connecting active speakers, select “Active speakers” in the connection
wizard under “Audio equipment selection”. The sound for the active speakers
is transmitted via the AUDIO OUT L/R connections to the active speakers. Make
connections to the active speakers using the cinch cables.
Make the audio settings on the TV set when active speakers are connected.
When using an external audio amplier, make the audio settings on the audio
amplier.
PREOUT
FR
FL
SL SR SUB
C
L L
R R
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUTAUX 2
C
AUDIO OUT
R
L
AUDIO IN
C
PREOUT
FR
FL
SL SR SUB
C
L L
R R
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUTAUX 2
OUT
AUDIO DIGITAL
AUDIO IN