Filter
Top Products
- 22
Adjusting the picture
Call TV menu.
Select Picture,
go to the menu line below.
Select the desired picture function,
go to the menu line below.
Make changes.
Explanations of the picture settings:
Switches the picture parameters between personal set-
tings and energy efficiency presettings.
Adjust contrast.
The power consumption of the TV set is directly depend-
ent on the value set here (see also page 13).
Adjust the colour.
Set warmer or colder tone for picture.
Adjust the brightness of the picture.
Adjust the contour sharpness of the picture.
Removes or reduces the signal noise in the picture.
Call with OK.
Picture improvement on/off and demo mode for Image
+
Active.
Set picture format (see right hand column).
Move picture vertically (see page 23).
Automatic detection and setting of the picture format for
Cinemascope or widescreen movies.
Reduce jolting.
The TV picture adapts to the ambient brightness.
The energy consumption of the set is reduced by contrast
reduction in a lower ambient brightness. The contrast
and energy consumption increase with a high ambient
brightness.
Daily operation
Presettings / Personal settings for picture adjustment
Call TV menu.
Select Picture,
go to the menu line below.
Select Picture adjustment,
go to the menu line below.
Select Presettings or Personal settings.
For presettings, go to the menu line below.
Select the desired presetting for the picture.
OK Confirm selection.
Explanations for Picture adjustment:
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise control are saved in the Personal
settings. Every signal source has its own personal settings.
By selecting Presettings the picture settings for the respective currently
active signal source are set to predefined values.
For an explanation of the signal sources see glossary: Signal input groups.
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset
picture/sound
or Factory settings picture/sound.
Selecting the picture format
Press the Picture format button until the desired picture
format is set or press
to select the desired picture format.
The Panorama picture format can be set between
proportionally correct and format filling display. Black
bars are visible on the left and right of the picture in
the proportionally correct display.
Switch: Keep the M button on the TV pressed, at the
same time, press the Picture format button on the remote
control briefly.
Reset: Press the same button combination again.
Picture
adjustment
Contrast
Colour intensity
Colour
temperature
Brightness
Sharpness
DNC
more ...
Image
+
Active
Picture format
Move picture
up/down
Auto format
DMM
Automatic
dimmer
continued on next page
p
ENDINFO
Contrast
Colour tem
p
Colour intensity
Picture adjustment
Picture
TV menu
Presettings (TV digital)
...
ENDINFO
Picture adjustment
Eco standard ...
Picture
TV menu
Presettings (TV digital)
Personal settings (TV digital)
16:9
Picture format
4:3 Cinema
Zoom
Panorama
Downloaded From TV-Manual.com Manuals