Loewe Connect 37 Full-HD+ 100 CRT Television User Manual


 
- 52
Connecting audio amplifiers
The sound component wizard permits configuration of different audio
amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with
different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM).
See the operating manual for the audio amplifier for more information.
Call TV menu.
Select Connections,
go to the menu line below.
Select Sound components.
OK calls the sound components wizard.
Mark the HiFi/AV amplifier.
OK Procced.
Select whether the sound is to be transmitted
digitally or analogue to the the amplifier.
Continue, depending on the amplifier, see right column.
Explanations of the setting possibilities:
Select the setting when an amplifier is connected and the
TV speakers are not used.
Playback can be switched between TV speakers and
amplifiers in the sound menu after logging in a hi-fi
amplifier under Sound via....
Specify sound formats which can be decoded with the
digital amplifier (see operating manual of the used ampli-
fier).
Select either stereo or surround amplifier.
For every connected surround amplifier, select whether the
TV speakers are to be used as centre speakers.
If so, make a connection between the centre output of
the amplifier and the centre input of the TV set AUDIO
IN1 C with a cinch cable.
Attention: Do not use the centre speaker connection of
the amplifier, use the centre pre-amp output instead!
Connecting digital audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select yes.
Connect the digital audio output of the TV set AUDIO
DIGITAL OUT with the digital audio input of the amplifier
via a cinch cable:
Set sound formats, amplifier type and other settings, see
explanations of the setting possibilities (left hand
column).
Connecting analogue audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select no.
Connect the analogue audio output of the TV device
AUDIO OUT L/R via a stereo cinch cable to the analogue
audio input of the amplifier:
Select amplifier type and other settings, see explanations
of the setting possibilities (left hand column).
Operating additional equipment
HiFi/AV
amplifier
Sound formats
Type of
amplifier
TV loudsp. as
centre speaker
END
OK
OK
 
TV speakers + active subwoofer
Active speakers
HiFi/AV amplifier
Sound projector
Sound projector or TV speakers (swichable)
Sound components
Sound playback via ...
Proceed
PREOUT
FR
FL
SL SR SUB
C
LL
RR
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUTAUX 2
TV set
Digital amplifier
AUDIO DIGITAL OUT
PREOUT
FR
FL
SL SR SUB
C
LL
RR
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUTAUX 2
AUDIO OUT L/R
TV set
Analogue amplifier
Downloaded From TV-Manual.com Manuals