Filter
Top Products
- 50
Operating additional equipment
If you want to set up or change a speaker system:
34 Select Configuration/modification,
OK call selection.
6 Select Complete,
OK continue to connect and set the front speakers.
34 Select External speakers,
6go to the menu line below and
34set the lower limit frequency of the front speakers
in 10 Hz steps.
➠ Select the start value of the frequency response of the
speakers for the right setting (e.g. 50Hz for the
specification "Frequency response 50-20.000Hz"). See
the technical data of the speakers for the value.
➠ You can replace the external front speakers by the TV
speakers if necessary. In this case, select TV speakers.
Then transmit the sound of the front speakers.
OK continue to connect and set the surround speakers.
34 Select yes for external speakers.
➠ If no surround speakers are connected, these can be
simulated using the front and centre speakers.
6Go to the menu line below and
34set the lower limit frequency of the surround
speakers in 10 Hz steps.
➠ Select the start value of the frequency response of the
speakers for the right setting.
OK continue to connect and set the centre speaker.
34 Select whether the TV speakers or an External
speaker is to reproduce the centre sound or no if
no centre speaker is connected.
➠ If no centre speaker is connected, the front speakers
also transmit the centre sound parts additionally.
6for External speakers or TV speakers go to the
menu line below and
34set the lower limit frequency of the centre speaker
in 10 Hz steps.
➠ Select the start value of the frequency response of the
speakers for the right setting.
OK continue to connect the Subwoofer.
34 yes is the selection for subwoofer.
➠ If no subwoofer is connected, the front speakers
additionally transmit the sound parts intended for the
subwoofer as far as possible.
continued on the next page
END
OK
OK
Proceed
Complete
Distances only
Connections only
Configuration/modification of speaker system
Sound components
Sound components wizard
Please specify here whether you want to completely reconfigure a speakers
system or whether you want to limit the configuration to changing the
speaker connections, the speaker distances from the listening position or
the individual speaker levels in relation to each other.
Levels only
END
OK
External speakers
Connect front speakers
Sound components
Sound components wizard
Please specify here whether you want to connect
external front speakers. In this case, their lower
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
40 Hz
Proceed
TV speakersTV speakers
40Hz
40Hz
END
OK
70Hz 70Hz
External speakers
70 Hz
Connect front speakers
Sound components
Sound components wizard
Please specify here whether you want to connect
external front speakers. In this case, their lower
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
Proceed