Loewe 52 Flat Panel Television User Manual


  Open as PDF
of 74
 
- 64
Rotating the TV set
Your TV set has a connection for a rotating stand control. If the set is
mounted on a motorised Loewe stand, you can use the remote control
to adjust it to your seating location accordingly.
➠ A motor unit is connected.
➠ In normal TV mode, without other displays.
34 Rotate the TV set.
Do not place any objects in the rotation range of the TV set that could
obstruct the rotation or that could be knocked over by the rotation
movement.
Setting the range of rotation
You can specify the rotation range of the TV device (maximum +/- 40
degrees) by setting the maximum right and left stop position.
Call TV menu.
34 Select Settings,
6go to the menu line below.
34Select Miscellaneous,
6go to the menu line below.
34Select Rotate TV,
6go to the menu line below.
34Select Basic adjustment,
OK calls the basic adjustment.
4Basic adjustment (right)
Turn your TV set as far to the right as the installation
position of your set allows. This will be the maximum
right rotation position in future.
OK confirms basic adjustment to right.
3Basic adjustment (left)
Turn your TV set as far to the left as the installation
position of your set allows. This will be the
maximum left rotation position in future.
OK ends the basic adjustment.
Close the menu.
Specifying the switch off position
This is where you specify the position that the TV will take when it is
switched off. In order for the TV set to return to the determined switch-off
position when switching it off, this must be activated (see below).
Call TV menu.
34 Select Settings,
6go to the menu line below.
34Select Miscellaneous,
6go to the menu line below.
34Select Rotate TV,
6go to the menu line below.
34Select Set switch-off position,
OK calls Set switch-off position.
34Set desired switch-off position.
The TV set rotates in the process.
OK Save the set position as the switch-off position.
Close the menu.
Activating the switch-off position
Call TV menu.
34 Select Settings,
6go to the menu line below.
34Select Miscellaneous,
6go to the menu line below.
34Select Rotate TV,
6go to the menu line below.
34Select Activate switch-off position,
6go to the menu line below.
34Select yes.
Close the menu.
If the TV set is switched off with the on/off key on the remote control or
with the switch integrated in the display then it will turn to the defined
switch-off position. When it is switched back on, it returns to the position
last set.
Operating additional equipment
END
OK
21
Basic adjustment (right)
Rotate TV
Proceed
END
OK
-30
Basic adjustment (left)
Rotate TV
End of basic adjustment
END
INFO
OK
0
Set switch-off position
TV menu
Settings
Miscellaneous
Rotate TV
Adopt
 previous next