Filter
Top Products
- 32
Recording Menu
Rec Mode Set
You can set the picture quality for recording:
DVD±R/RW (4,7 GB) HQ mode: approx. 1 hour.
SQ mode: 2 hours.
LQ mode: 4 hours.
EQ mode: 6 hours.
HDD (250 GB) HQ mode: approx. 67 hours.
SQ mode: approx. 125 hours.
LQ mode: approx. 237 hours.
EQ mode: approx. 355 hours.
OK
Rec Mode Set
Rec Aspect
DV Rec Audio
TV Rec Audio
Auto Chapter
AV2 Recording
Timeshift
EQ
LQ
SQ
HQ
Prev.
SelectMove
Call menu.
5 6 Select symbol Record.
4 Call second level.
5 6 Select Rec Mode Set.
4 Call third level.
56 Set desired recording quality (EQ, LQ, SQ or HQ).
Confirm with OK.
Rec Aspect
You can adapt the picture format (16:9 or 4:3) to the material being recorded
during the recording.
DV Rec Audio
You need to use this setting if your camcorder with
32 KHz / 12-bit is connected to the DV IN socket on the front panel.
Some digital camcorders have two stereo tracks for audio. One is used for record-
ing, the other is used for post-editing.
Audio 1 The original sound is recorded.
Audio 2 The edited sound is used.
TV Rec Audio
When recording bilingual TV you can select the audio channel to be recorded.
Main+Sub: both languages are recorded.
Main: language 1 only.
Sub: language 2 only.
Auto Chapter
Chapter start marks are inserted at fixed intervals in recordings on DVDs in video
mode. You can select intervals of 5, 10 or 15 minutes. If you select None automatic
chapter setting is switched off.
AV2 Recording
The signal type can be selected to record the video in signal of a device connected
to the AV2 DECODER.
Auto The video in signal is adapted automatically to the received
video signal.
CVBS Only for recording a CVBS input signal.
RGB Only for recording an RGB input signal.
Timeshift
The recorder can be set so that it is always in timeshift mode in the on state. Cur-
rent TV programs are then recorded automatically (page 49).
OFF Manual timeshift function.
ON Automatic timeshift function.
Initial Installation