Filter
Top Products
51 -
Timer Recording
This recorder can be programmed to record up to 16 programs within one month.
For programmed recordings the timer must be informed which signal sources
(TV stations or from AV devices) are to be recorded and the respective start and
stop time.
Switch on the recorder. Insert a rewritable disc for DVD recordings.
Call the Timer Record List menu.
5 6 Select the NEW option and confirm with OK.
The Timer-Record menu appears.
OK
END
Enter
CloseTimer Record List
REC-MENU
Timer Record SQ 80H 9M Free
Media PR Date
HDD 31
S23 K1 Duration : 105 M
StartTime EndTime Repeat
VPS/
PDC
8/12 Fr 20:15 22:00 Once Off
Media Select the memory medium for the recording.
CH/PR Select the stations or an external input.
Date Select the data up to one month in advance.
Start time Defines the start time for the recording.
End time Defines the end of the recording.
Repeat Select repetition (once, daily (Mo-Fr), weekly).
VPS/PDC (only analogue TV) The VPS/PDC system adapts the recording
time automatically to changes in the program start time for
recordings via the integrated tuner. Set the VPS/PDC time
and the date of the program you want to record. You will find
these in your TV guide or in the teletext.
Enter the necessary information for your timer recording(s).
3 4 Move the cursor to the previous / next column.
5 6 Edit the setting at the current cursor position.
OK saves timer data.
Exit Timer Record menu without saving.
Call Timer Record List menu.
Switch recorder to standby.
The timer symbol appears in the TV display (page 7).
➠ The recorder must be in standby mode for timer recording to start automatically.
➠ Please note that not every station operates with VPS/PDC.
➠ The starting time for the recording must be at least 3 minutes into the future.
The recorder switches on about 2 minutes before the programmed time and
runs up to about 2 minutes after the programmed time.
➠ The current time and the current date must be set in the recorder (page 27).
➠ Select the audio channel for two-language TV recordings in the “TV Rec Audio”
menu (page 32).
Timer recordings with the ShowView®
system
This set makes programming timer recordings (analogue TV only) child’s play. Many
TV program guides publish the ShowView number for the TV programs. So when
you want to make a timer recording of a programme, you only need to key in the
appropriate ShowView code number. You can specify the recording quality to the
recorder optionally and determine whether it is a single or a repeated recording.
You can save a maximum 16 timer programs on the recorder.
Select ShowView menu with the green button.
OK
END
Enter Delete
Close0-9 Input
MENU
ShowView
Number
Enter the ShowView number.
Delete input errors.
Confirm with OK. The Timer Record menu appears.
Check and, if necessary, correct the settings as described under
“Timer Recording” (this page).
➠ The ShowView function is only possible for recordings made with the inte-
grated analogue receiver (tuner) of the recorder. This function is not possible
when recording from an external source (e.g. from a connected SAT receiver).
Recording