Filter
Top Products
31
Transporter™ Owner’s Guide
Instructions for conguring common rewall applications,
including Norton Personal Firewall, Norton Internet Security, ZoneAlarm, McAfee Security
Center, Trend-Micro PC-Cillin, can be found by searching the FAQ for the rewall name at:
. If your rewall allows you to open specic ports, the ports
you need to open are:
• Port 3483 (UDP protocol)
• Port 3483 (TCP protocol)
• Port 9000 (TCP protocol)
VPN clients for connecting to corporate networks remotely can also cause this behavior.
If you can nd rewall options in your VPN client. Some examples of VPN clients include
Cisco VPN Client and Checkpoint VPN+Firewall-1.
If you have a Transporter and you have connected it using both ethernet and wireless,
your Transporter may be set up for bridging and has created a “loop” in your network
and you need to disconnect one of your network connections. Unplug the ethernet
connection or go back to the setup screens to set up your Transporter to connect using
ethernet.
Use a UNC-style path to specify your music library in the Server Settings page. Instead of
X:\path for a mounted volume, use \\SERVERNAME\path\ style addressing. This works
for some servers where direct volume letter mapping does not. You may have to use the
IP address of the machine sharing the network drive (for example: \\192.168.1.105\
Files\Music\). Please note that in order for this to work, the network share must not
require authentication (a username or password).
You can create links or shortcuts to other folders and place them in your specied Music
Library Folder. The contents of the linked folders will then be part of your Music Library.
More information about this can be found in the FAQ at .
If you add music to your music library, you may need to tell SlimServer to rescan your
music library. From the web interface, click Server Settings, and click Rescan. SlimServer
begins to examine your music folder, looking for new music.
Depending on how much music you have, this could take several minutes. The new
music will not appear in your music library on the SlimServer until the rescan is complete.