Filter
Top Products
32
Picture of the System Setting Menu
See screen shot at right:
DATE and TIME are used to modify the current system date and time;
after the modification reserve the change by selecting SAVETIME;
in HDDFULL if selecting OVERWRITE system covers the previous
recording files; RECORDLEN can set the length of each recording
file(15 mins, 30 mins, 60 mins)Note: 15 minutes is suggested.
Note: System time shall NOT be changed freely; otherwise it
would cause the malfunction of recording search.
Select the corresponding channel in CH. In WEEK the letter of each
day is chosen, when the letter displays are highlighted. TIME1 and
TIME2 express the timed recording period of the current channel. TIME2
should be after the ending time of TIME1. The setting range is
00:00-24:00 STATE ON means the time setting is on. OFF means the
time setting is OFF.
Note: 1: If you need to record all day long, set TIME1 as 00:00-24:00
& state is on; setTIME2 as off. 2: When setting time in WEEK,
several days can be set at the same time.
When reviewing a certain channel’s timing, only the current day will
be highlighted.
Sc
hedule
6.4
.3 System
S
etting
General
DATE 0 6-1 1-2 0 0 3
FORMAT MM-DD-YYYY
TIME 12:22:01AM
FORMAT AM/PM
SAVE SAVETIME
HDDFULL OVERWRITE
RECORDLEN MIN
REMOTEADDR 008
SAVE CANCEL