Filter
Top Products
10
Basic Operation
Turn the Unit On
1. Turn the car ignition on to the accessory
position.
2. Press the POWER button.
Loading a DVD/VCD/CD Disc
1. Insert the disc with printed side facing
up into the disc slot. The player will
automatically search the disc.
2. The player starts playback automatically.
Ejecting a Disc
Press the EJECT button to eject disc.
Standby
1. With the unit on, press POWER on
the remote.
2. In standby state, press
POWER on
the remote, again to recall playback.
3. To cancel standby state, press POWER
on the unit's front panel.
Note: For Screen Saver mode select "On" in
Screen Saver setup. The screen saver will
automatically activate when playback is
stopped or paused and there is no button
operation for 5 minutes. Screen saver
mode will release automatically when a
disc is played. After 5 minutes, if the unit
is not operated while in screen saver
mode, it will enter standby state.
BASIC PLAY
Stopping Play
Press the STOP button to stop the disc
playback. Press the
PLAY button on
the remote or on the player, the disc
will continue with normal playback.
Press the
STOP button twice, to stop
the playback and go back to initial
Track/Chapter.
Pause (still picture)
Press PAUSE during playback on the
remote or on the front panel of the
DVD unit to stop play temporarily. Press
PLAY on remote or on the unit to
return to normal playback.
Rapid Forward/Rapid Reverse
Press FF and REW during play.
Each time the button is pressed, the speed
of rapid forward/reverse changes accord-
ing to the disc as follows:
DVD:
VCD/CD/MP3:
Slow Motion Play (DVD Only)
Press SLOW on the remote control
during playback. Each time the button is
pressed, the slow mode is changed
according to the disc as follows:
DVD:
DVD • CD • CDRW • MP3 PLAYER
PREV/CH
-
STOP
PLAY/PAUSE
NEXT/CH
+
IR
DVD
TV
AV
SOURCE
AUTO
V
V
VIDEO IN
LAUDIO IN 1 R
SETUP
POWER
ENTER
Disc Slot
Eject
Button
Power
Button
Normal Playback
2X 4X 16X 100X
Normal Playback
2X 4X 8X
1/32X 1/16X 1/8X 1/2X
MV-DVD-PL5Rev_B.qxp 11/2/04 3:48 PM Page 10