Filter
Top Products
12 Playing a Disc
1
Press STANDBY-ON to turn on the TV/DVD. The
unit will turn on in TV mode.
2
Press OPEN/CLOSE A to open the Disc tray. The
unit will switch to DVD mode automatically.
3
Place a Disc into the tray. If the DVD is recorded on
only one side, place the Disc in the tray with the label fac-
ing up and the shiny side facing down. Some DVDs are
recorded on both sides. Make sure the label of the side
you want to play is facing up.
4
Press PLAY B to close the tray and play the Disc.
If a DVD menu appears, see page 25. If play does not
begin, press PLAY B again.
To play MP3 and JPEG files, see page 38.
5
Press STOP C to stop play.
Remember, only certain Discs will play.
See page six for details.
• If a Disc is dirty or scratched, the
picture may be distorted or play
may stop. Remove the Disc and
try a different one.
•Pressing OPEN/CLOSE A or
PLAY B when the power is off
turns on the unit in DVD mode
(instead of the usual TV mode).
• If a Disc has multiple layers, the
picture may freeze occasionally.
This happens when the first
layer switches to the second
layer.This is not a malfunction.
Helpful Hints
1
2
4
5
20MC4204 04.2.25 9:33 PM Page 12