Magnavox 20MC4204/17 TV DVD Combo User Manual


 
Menu Language
This affects the language of the TV/DVD’s setup menus and
on-screen display terms. It does not alter the language of TV
programming, Disc subtitles, etc.
Before you begin, press SELECT to put the TV/DVD
in TV mode.
1
Press SETUP.
2
Press or to select LANGUAGE.
3
Press ENTER to select ENGLISH, ESPAÑOL,
or FRANÇAIS. The selected language will flash
inside the [ ].This will be the language of the TV/DVD
setup menus.
4
Press SETUP to remove the menu.
Menu Language, Resetting TV Channels 17
If you select Spanish or French menus
and need English, press SETUP. Press
or to select IDIOMA or LAN-
GAGE. Press ENTER repeatedly to
select ENGLISH.Then, press SETUP.
• The TV/DVD cannot change channels
at the Cable Box or Satellite Receiver.
Set the TV/DVD to channel 3, 4, or
AUX. Change channels at the Cable
Box/Satellite Receiver. See page eight.
If the power fails, you may have to
reset the TV channels.
•You cannot set up TV channels if the
unit is in DVD mode.
2-3
1,4
Helpful Hints
Resetting TV Channels
The TV/DVD may memorize channels when you turn it on
the first time.You may reset channels with these steps.
Before you begin, press SELECT to put the TV/DVD
in TV mode.
1
Press SETUP.
2
CHANNEL SET UP will be selected. Press ENTER.
3
Press or to select AUTO PRESET. Press
ENTER. The TV/DVD scans all channels and memo-
rizes available ones.When scanning is complete, the
TV/DVD will go to the lowest available channel auto-
matically.
To stop channel scanning before it is finished, press
SETUP on the remote.
2-3
1
— TV SETUP —
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B
– CHANNEL SET UP –
ADD / DELETE CH (TV)
AUTO PRESET
B
— TV SETUP —
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B
20MC4204 04.2.25 9:33 PM Page 17