Filter
Top Products
F
_Tow that you have completed
• ¥ the required connections on
the previous page you are ready to
follow the simple steps shown
below.
_Turn the VCR and TV
ON.
Place the VCR in the TV mode -
Use the TV/VCR button on
the VCR (or on the TV remote
if it is set to work your VCR -
see page 24.)
Place the TV's PIP INPUT
control to "VCR/AUX" -
Press MENU • or • on the
TV (or on the remote press M
button and then M •g
buttons.)
Select the word PIP INPUT
with the TV's on-screen
Arrow. Then press the (+)
button to select VCR/AUX.
Make sure the TV's "INPUT"
on-screen control is set to
ANTENNA.
<,_ Select the channel on the VCR
to view in the PIP window.
Select the channel on the TV to
view on the main screen.
_ Press the PIP ON/OFF button
on the remote.
The PIP window should show in
one of the comers of the TV screen.
O
Remember, if you see the
same picture on the main
screen and in the PIP window, you
need to be sure the TV's PIP
INPUT control is set to
"VCR/AUX."
No sound will be heard with the
PIP picture. See page 32 on how
to 'SWAP" the PIP picture with
the main screen picture so that
sound can be heard.
Also, see the following page on
how to operate other PIP features
[
12:00""
VCR IN "IV MODE"
(VCR Indicator Light will go out) PIP INPUT CONTROL SET TO "VCR/AUX"
VCR - FOR PIPCHANNEL TV - FOR MAIN SCREEN CHANNEL
VCR
SELECTED
CHANNEL
"IV
SE_D
CHANNEL
P
Be sure to point the remoqe attl_
front of the VCR when pressing
VCR function buttons.
31