Filter
Top Products
_ DIP hookup with Cable
I Converter Box and VCR.
_,_ First use an optional signal
splitter and connect the original
cable TV signal to both the
CABLE IN on the Cable Converter
and the ANTENNA plug on the
rear of the "IV.
_._ Connect the CABLE OUT on
the Converter to the ANT. IN on
the VCR.
_._ Connect the VIDEO OUT
jack on the VCR to the VIDEO IN
jack on the TV.
Also connect the AUDIO OUT (R
and L) jacks from the VCR to the
,AUDIO IN jacks on the TV.
Contact the Parts
Information Center
I 800 292-6066
to order any optional
acc..cssories
..L
REAR OF TV
CONNECT TO TV
ANTENNA/CABLE
INPUT PLUG
VIDEO IN
(YELLOW)
A
IJ
RCA PHONO PLUG
CABLES (NOT
SUPPLIED)
®
IN
@
@@
VCR
Remember, !
to use the Cable TV
Converter Box to
select channels for
PIP, the VCR must
be set to the same
channel as the
channel selection
switch on the rear of
the Cable Converter
(either channel 3 or
4).
CABLE TV CONVERTER
34