Filter
Top Products
l
OTE: If you went through
tup (in your Quick Use
Guide), this task has already been
completed for you.
Your TV can automatically set
itself for local area (or Cable TV)
channels. This makes it easy for
you to select only the TV stations
in your area when the CH(annel)
• • buttons are pressed.
_) Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word PROGRAM with the
TV's on-screen arrow.
_,_ Press the button the TVI
(+) (on
or the remote) to PROGRAM.
_.,_ Press (+) again to
the button
start the TV search for area
channels.
Flashing channel numbers will
count upward on the screen as the
TV looks for channels to "ADD".
Press any button (on the TV or
remote) to stop the channel search
at any time. When the channel
search is completed the TV will
return to the last viewed channel.
Press STATUS button to clear
rthescreen
Try it out. Press
CHANNEL AT buttons and
see which channels have been added.
Remember, if you want to drop any
unwanted channels from the TV's
memory, see the next page on how to
"Manually" add and delete channels.
Note: As the TV searches for
channels to "ADD" into memory the
on-screen display may move (or
jitter slightly). This is normal
[ _peration and does not indicate a
eed for service.
"RED" channel numbe_ have been
added to the 'IV's memory.
"WHITE" channel numbers are not
present in the TV's program memory.
PRESS ÷ TO
AUTO PROGRAI_I
CHANNELS
888
I he TV screen will be blocked off
until the search for channels is
done.