Filter
Top Products
he picture for the PIP window
an come through the TV's
ANTENNA or VCRIAUX Inputs
(on the rear of the TV.) The PIP
INPUT control simply tells the TV
which one of these two sources it
is to show in the PIP window
m-ffdrm
_._ Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word PIP INPUT with the
TV's on-screen arrow.
_.,_ Press the (+) button to select
the source for the PIP picture:
ANTENNA -
for a picture signal coming
from the ANTENNA input on
the rear of the TV.
VCR/AUX -
for a picture signal coming
from the Video Input jack on
the rear of the TV.
Used for VCR (or other direct
video accessory) connections.
Note: The TV's S-VIDEO Input
plug cannot be used as a video
source for the PIP window. Also,
when S-VIDEO is selected for the
main screen INPUT the PIP
window will will not appear.
(_ Press the STATUS button to
clear the screen.
@
Remember, the PIP
screen will be blank unless
a signal is connected to the
selected source (either ANTENNA
or VCR/AUX) on the rear of the
TV.
With ANTENNA selected (as the
PIP INPUT source), the main
screen and PIP window will show
the same picture. The VCR/AUX
inputs (on the rear of the TV) must
be used in order to see a different
channel or picture source in the
PIP window.
For details on how to view separate I
programs on the PIPwindow and main
I
._r_n. see the PIP connection .section.
33