Filter
Top Products
9
Use of the remote control
Note: Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.
The list will be removed automatically after six seconds or press OK to remove immediately.
VOL / Volume
Press or to adjust the volume.
OK
- to activate a setting
- to display the list of channels stored
(according to the selecion made in the
Installation mode (Antenna or Cable),
p.13.
Color buttons
When functions attached to the color
buttons, the color buttons are shown on
screen.
MUTE
Interrupt the sound or restore it.
VIEW
To display a list of all channels marked as
favorite (incl. subchannels).
Smart Sound button
Press repeatedly to select among the four
settings; Personal, Speech, Music, Movies,
or Multimedia.
Smart Picture button
Press repeatedly to select among
Personal, Rich, Natural, Soft,
Multimedia or Eco picture settings.
INFO button
Display information: Press to display
(when available) information about the
selected TV channel and program or
accessory device.
POWER
Press to turn on/off the TV from or to standby
mode.
Note: The TV is never powered off
completely unless it is physically unplugged.
A/CH
Press to alternate between the
currently viewed channel and the
previously viewed channel.
AV
Press this button repeatedly to select AV1,
AV2, AV3, HDMI1, SIDE or TV when in TV
mode, according to where you connected the
accessory devices (p. 28).
Type the dot for digital channels.
Channel selection
-To browse through the TV channels or
sources stored in the preferred channel list
(see p. 26).
-To select between Antenna or Cable TV
channels, first make your selection in the
Settings menu, see, p. 13.
Note: You don’t have to start the installation
again once you have searched for and stored
the available TV channels.
MENU
Settings menu on/off, see p. 12.
To add or remove a channel in the favorite list
of TV channels.