Filter
Top Products
HOW TO USE THE REMOTE TO CONTROL YOUR TV
25
These buttons are also used for FAVORITE CHANNELS. (See page 35)
The "ENTER" button will set features to your preference.
"CHANNEL SELECTOR" buttons are used to set the time, for channel
memory, etc..
CHANNEL SELECTOR buttons
Enter two or three numbers to select channels. Enter a "0" first for
channels 1 to 9. Use the "100" button for channels 100 and higher.
Channel selection may also be performed by pressing channel up ( ) or
down ( ).
NOTE: The TV may not receive some channels if you are not in the correct
AIR/CABLE mode. (See page 32)
AVX button
The AVX (Auxiliary Video) button will select between the antenna signal
and the three sets of video input jacks each time the button is pressed. If
the Picture-in-Picture (PIP) is on, the AVX will select between the three
sets of video input jacks. (See page 21)
VOLUME, MUTE buttons
Press the "VOLUME" up ( ) or down ( ) button until you obtain the
desired sound level.
To turn the sound off instantly to answer the telephone, etc., press the
"MUTE" button. Press the "MUTE" button again or press the "VOLUME"
up ( ) button to restore the sound.
The word "MUTE" will remain displayed if the CLOSED CAPTION feature
is turned off.
The word "MUTE" will not be displayed if the CLOSED CAPTION feature
is on.