Filter
Top Products
TRACKING
MUTE
REC/OTR
SPEED MEMORY
0
8 97
5 64
2 31
PAUSE/STILL
ALT.CH
STOP
F.FWD
PLAY
REW
VOL.
STATUS/EXIT
M
E
N
U
POWER
SLEEP/WAKE UP
CH.
C
LE
A
R
10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the
channels you receive when you turn it on for the first time,
you may set up channels again by following the steps below.
PRIMARY SETUP
SELECT LANGUAGE
> AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
SELECT KL CHOOSE B
TO END PRESS EXIT
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START FINISH
• Line Input mode will always be
channel 00. You cannot delete it.
• You cannot select AUTO PRO-
GRAMMING at step 3 if you are
in Line Input mode.
Helpful Hints
4
Wait for the TV/VCR to set up
channels.
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
PRESS B
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ but-
ton to select PRIM. SETUP, then press the
F.FWD/B button.
3
Press the PLAY/▲ button or the STOP/▼ but-
ton to select AUTO PROGRAMMING, then
press the F.FWD/B button. AUTO CH PRO-
GRAMMING ... will appear on the screen. The TV/VCR
distinguishes between TV channels and cable channels
automatically, and the TV/VCR will memorize its avail-
able channels.
4
Wait for a few minutes. When setup is complete,
CHANNELS ARE SET will appear on the screen.
Then the programming of the lowest channel number
will appear on the screen. Now, when you press the
CH(annel) o/pbuttons, you will scan only through
channels you receive. You can still select non-memo-
rized channels using the Number buttons.
2-3
1
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 10