Filter
Top Products
AUDIO In Jack: jack on the front of the TV/VCR which is
used to record audio from another source.
Automatic Channel Setup:
process in which the
TV/VCR memorizes all available channels. Then, when you
push the CH(annel) o/p buttons, you only scan through
channels you receive.
Bands:
settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels
2-13) and UHF (ultra high frequency; channels
14-69).
• Cable – all standard channels can be received without a
Cable Box.
Brightness:
adjusting increases or decreases the bright-
ness of the color on the screen.
Color
: adjusting pales or brightens the TV/VCR color.
Dubbing:
copying a tape using a VCR.
HQ:
high quality; a feature in the TV/VCR circuitry which
provides enhanced picture detail.
Line Input:
The channel to which you set your TV/VCR
during dubbing. The line input channel is always channel 00
(A/V IN).
Mode:
a TV/VCR operation.
OTR:
One-Touch Recording; a timed recording that starts
immediately and records for 30 minutes to eight hours,
whichever you specify.
Picture:
adjusting increases or decreases the contrast of
the picture on the screen.
Sharpness:
adjusting softens or clarifies the picture on the
screen.
Tape Speeds:
how fast the tape travels during playback or
recording.
• SP (standard play) – fastest tape speed (recording time
for a T120 tape is approximately two hours); best picture
quality.
• LP (long play) – average tape speed; playback only.
• SLP (super long play) – slowest tape speed (recording
time for a T120 tape is approximately six hours).
Tint
: adjusting changes the tints of the picture on the
TV/VCR from purple to green.
VIDEO In Jack:
jack on the front of the TV/VCR which is
used to record video from another source.
Glossary 53
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 53