Filter
Top Products
6
DVD Setup Menu
39
English
Setting up the AUDIO SETUP page
1 Press the SETUP button.
2 Select AUDIO SETUP PAGE using the cursor
buttons (
2
/
3
), then press the ENTER
button.
3 Use the cursor buttons (
5
/
∞
) to select the
desired item, then press the cursor (
3
) or
ENTER button.
AUDIO SETUP PAGE
AUDIO OUT
DIGITAL AUDIO
HDMI AUDIO OUT
CD UPSAMPLING
AUDIO DRC
Note
• Press
2
to go back to the previous menu item.
Press SETUP to exit the menu.
AUDIO OUT
If you connected this player to your amplifi er
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set
this to 5.1 Channel; if you connected only
the stereo outputs, set to 2 Channel.
• Default setting: 5.1 CHANNEL
• 2 CHANNEL – Select this to change
the channel output to stereo, which
only delivers sound from the two front
speakers and a subwoofer.
• VIRTUAL SURR – Select this to virtually
reproduce the surround channels.
• 5.1 CHANNEL – Select this setting
when using a multichannel audio/(video)
receiver with 6 channel inputs. In this
mode, the player performs DTS decoding
or Dolby Digital 5.1-channel decoding
when applicable, and Dolby Pro Logic
decoding on DVD-Video, Video-CD and
Audio CD discs with 2-channel sound
tracks. No Dolby Pro Logic decoding is
done with Super Audio CD discs.
Note
• You can also select it using the SOUND MODE
buttons on the remote control.
• Some DVD-Audio discs don’t allow downmixing of
audio.