Filter
Top Products
ENGLISH
13CONNECT 236™
Press the “REC” button, the Control 236 will return to the operation mode.
Note:
1. During the setting, the mode will return to the previous stage ifthere is no input for 10 sec.
2. Unplugging the AC Power adapter will clear the REC settings.
3. InRECmode,the“<”/“>”buttonsstillwillchangethechannel.
4. You can also use the Remote Control for changing the channel.
FREQUENTLY ASKED QUESTIONS
No picture
Checktoverifythat;
- yourScartCableisproperlyconnectedtoyoursystemandtheConnect236.
- yourScartCableisproperlypluggedintoyourTVfromtheConnect236Output.
- youhaveselectedthecorrectinputchannel.
- your TV is on the appropriate video input.
- yourTVandConnect236areturnedon.
No sound
- Check the connecting cables.
- Check the volume setting of the TV.
- Check whether the audio signal is transmitted by the cable used (S-VIDEO cables or
partially pinned Scart cables do not transmit audio).
- ChecktoverifythatyourTVandsystemareturnedon.
The image is very grainy/there is background interference
- Switch off equipment which is not being used. Sometimes equipment transmits a very
strong signal, which can cause interference.
- Checkthequalityofthecablesused.