Filter
Top Products
14 © MARMITEK
TECHNICAL DATA
General
Power requirements: AC 9V 500mA
Power consumption: 2W
Dimensions: 285mmX260mmX55mm
Mass: 2Kg
Inputs/Outputs
Inputsonthefront: Ch6=1xRCAVideo,2xRCAAudio(L+R)
Inputsontheback: CH1-5=5xScart,3xCoaxialRCAaudio
Outputsontheback: OUTPUT,CH2,CH3=3xScart,1xRCAVideo,4xRCA
Audio(2xL+R),1xRCACoaxialaudio
Product modifications may take place without prior notice
ALSO AVAILABLE
1. Wireless audio and video
You can connect a product from the Marmitek GigaVideo
seriestotheOUTPUTorREC1/REC2connectionofthe
Connect236totransmittheaudioandvideosignalwirelessly
throughout the entire house. This means you can also
transmit the signal to a TV in another room and watch the
signalsfromeverydeviceconnectedtotheConnect236.
Thebuilt-ininfraredreturnchanneloftheGigaVideoseries
also means you can control the equipment and the Connect 236 remotely, even through
walls and ceilings!
2. Control your Connect 236 and A/V equipment that
is out of sight.
Marmitekoffersarangeofproductstocontrolyourequipment
inaclosedcabinetorfromadifferentroom,bothwiredand
wireless.
For these so called infrared extensions, more information can
be found at: www.marmitek.com.
3. Audio and video via the coax
The Marmitek MegaVideo products give you the possibility to
add the OUTPUT or REC1/REC2 signal of your Connect 236 as
an extra channel to your coax cable. You can watch the signal of
every device connected everywhere in the house where there is
acoaxconnection.Thebuilt-ininfraredreturnchannelofmodel