Filter
Top Products
ALARM
1. ALARM ENABLE
To set the ALARM ENABLE. It will be triggered by event occurrence when the
setting is ON.
2. ALARM DURATION
Set the reaction time which was determined by how long the alarm mode
responded to a buzzer. Default setting is 10 sec. Options are 10 SEC, 15 SEC, 20
SEC, 30 SEC, 1 MIN, 2 MIN, 3 MIN, 5 MIN, 10 MIN, 15 MIN, 30 MIN, ALWAYS, AUTO.
3. REC IPS
Select the images per second of recording during an ALARM. The options are as following:
NTSC－ 30、 15、 8、 4、 2、 1
PAL－ 25、 12、 6、 3、 2、 1
4. QUALITY
There are four quality settings during an ALARM : BASE, BEST, HIGH, NORM.
5. RECORD MODE
There are three record mode settings : QUAD-FRAME, QUAD-FIELD,
FULL-FIELD.
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
(ALARM)
ALARM ENABLE YES
ALARM DURATION 15 MIN
RECORD IPS 30
QUALITY NORMAL
RECORD MODE QUAD-FRAME
DWELL
1. NORM
To set up the DWELL time period that each channel auto sequentially shows on call
monitor. The level is from 1 to 15 SEC or OFF.
2. ALARM
To set up the DWELL time period when alarm input is triggered. The level is from 1 to
15 SEC or OFF.
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
(DWELL)
NORM ALARM
CAM1 01 01
CAM2 01 01
CAM3 01 01
CAM4 01 01
PIP
1. FULL SCREEN
To set up the full screen background picture display.
2. PIP SCREEN
To set up the picture with a 1/9 size screen “insert”.
3. POSITION
There are six position settings : D/L, D/M, D/R, U/L, U/M, U/R.
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
(PIP)
FULL SCREEN CAM 1
PIP SCREEN CAM 2
POSITION D/R
14