Maxtor 4 CH Digital Multiplex Recorder DVR User Manual


 
SPECIFICATIONS
21
Video format
NTSC/EIA or PAL/CCIR
Hard disk storage
IDE type, UDMA 66, supported 200 GB HDD
Record mode
Manual / Alarm / Timer / Motion
Camera Input Signal
Composite video signal 1 Vp-p 75
Ω
BNC, 4 channels
Camera Loop Back
Composite video signal 1 Vp-p 75
Ω
BNC, 4 channels
Main Monitor Output
Composite video signal 1 Vp-p 75
Ω
BNC
Call Monitor Output
Composite video signal 1 Vp-p 75
Ω
BNC
Audio input
4 audio inputs, (RCA) *
Audio output
2 audio outputs, (RCA) **
Motion Detect Area
16 * 12 targets per camera
Motion Detect Sensitivity
99 Levels
Video Loss Detection
Yes
Refresh Rate
Up to 240 images/sec. for NTSC / 200 images/sec. for PAL
Recording Rate
Up to 30 images/sec. for NTSC / 25 images/sec. for PAL
Dwell Time
Programmable (1~15 Sec)
Picture in Picture
Yes (Movable)
Key Lock
Yes
Picture Zoom
2*2 ~4*4 (Movable)
Camera Title
8 letters
Video Adjustable
Hue/ Color/ Contrast/ Brightness Adjustable
Alarm Input
TTL input, Hi (5V), Low (GND)
Alarm Output
COM./N.O/N.C
Remote Control
RS-232 or RS-485
Time Display Format
YY/MM/DD, DD/MM/YY, MM/DD/YY, OFF
Power Source
AC90~220V, 47Hz~63Hz
Power Consumption
<32W
Operation Temperature
10 ~ 40
RS-232C / RS-485 (bps)
115200
57600
19200
9600
4800
3600
2400
1200
Dimension (mm)
343(W) x 223(L) x 59(H)
Net Weight
2.05 kgs
Specifications are subject to change without notice.
DMR
4 audio inputs, can select only 1 during operation for recording
with 2 mono audio outputs from the same source.