Filter
Top Products
7. FACTORY DEFAULT
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
ADVANCED SETUP PAGE
1. ALARM SETUP
Press direction buttons up/down to
FACTORY DEFAULT items position.
Press ENTER to restore.
** CAUTION!! **
ALL SETUP VALUE WILL BE CLEAR,
AND RESTORE FACTORY DEFAULT!!
PRESS [ENTER] TO RESTORE.
PRESS [ESC] TO CANCEL.
Press ENTER button to restore.
Press ESC button to cancel.
8. SOFTWARE UPDATE
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
SOFTWARE UPDATE
UPDATE METHOD:
START UPDATE
UPDATE METHOD: USB / HTTP / UNIX
USB: Copy firmware to USB device, and then plug in DVR USB interface. Choose START UPDATE and then
press ENTER to start. Or save the update version to USB device, DVR system would do data update
automatically. USB ERROR displays if no any USB device plug.
NETWORK: Press START UPDATE to link. 80 Port must open in your network server.
UNIX: For R&D testing.
46