Filter
Top Products
63
. ADVNACED SETUP PAGE Æ P.T.Z SETUP
TZ SETUP PAGE
: CH01 ~ CH4
L: PELCO-P / PELCO-D / LILIN / ABC / ELITAR / DENTEC-D / DENTEC-P / OFF
fter PTZ setup done, go back to live mode. Press W.M. button to PTZ mode.
right/up/down
e PTZ Dome. PTZ Dome can not be control on split screen.
S. Because the P / T / Z Dome setup is independent by channel and ID, user does not worry about the
and
6
P / T / Z Dome mode.
ADVANCED SETUP PAGE
PTZ SETUP PAGE
TOCOL
S
CHANNEL NUMBER
1. ID
2. PRO
3. BAUDRATE
4. AUTO TOUR
5. LINE SCAN
6. AUTO FOCU
7. AUTO IRIS
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. P.T.Z SETUP
7. HDD FORMAT
8. FACTORY DEFAULT
9. SOFTWARE UPDATE
P
CHANNEL NUMBER
1. ID: 01 ~ 4
2. PROTOCO
3. BAUDRATE: 1200 / 2400 / 4800 / 9600
4. AUTO TOUR: ON / OFF
5. LINE SCAN: ON / OFF
6. AUTO FOCUS: ON / OFF
7. AUTO IRIS: ON / OFF
A
Icon displays beside date and time caption. To use direction button left/
to mov
P
different ID / Protocol / Baud Rate would affect DVR controls P / T / Z dome error. Just make sure channel
ID / Protocol / Baud Rate corresponding is correct.