Filter
Top Products
3. Setting up the DVR
The following sections detail the initial setup of the DVR
3-1. SETUP - Main Screen
When you press the SETUP button, the DVR will ask for a password (Figure 3.1.1). The default password is
1111, which can be entered by pressing the up button (
)
4 times and then pressing the SEL button. We
recommend you protect the system by assigning a new password immediately. The procedure for assigning a
password is found in section 3.4 SYSTEM. After a password has been assigned, enter the password by using
the 4 direction keys (representing 1, 2, 3, & 4), and then press the SEL button for password validation. Once
the password is entered, you will see the screen as shown in Figure 3.1.2. Navigate through the menu items
and press the SEL button to enter the sub-category menu.
Figure 3.1.1. Password screen
20