Filter
Top Products
when connecting to this DVR through the client software program. After
selecting this menu item you will be prompted for your current password
(the default password is 1111) and then the new password. Follow the
prompts to change and confirm the new password. Use the arrow
controls to change the password as described in ADMIN PASSWORD
above.
3-8. Setup – Network Mode
Set up your network parameters on the Network Setup screen.
Figure 3.8.1. NETWORK setup screen
Table 3.8.1. Menu items in Network Setup screen
Item Description
PORT
Port number (Default: 5445)
CLIENT ACCESS
Enable/Disable remote access through client software.
BANDWIDTH SAVING
Enable/Disable only key frame transmission. “ON” mode is favorable for
use of low network bandwidth. Mostly, set “OFF” for normal use.
NETWORK TYPE
Set the type of network connection. Options are:
LAN, DHCP, ADSL
Note. Other parts of the Network Setup screen change depending on what
network type you select.
DHCP
Sets to use HDCP (If this is selected, DVR automatically get IP varying
from time to time from network.)
ADSL (PPPoE)
ID: Registered ID is necessary for ADSL connection.
Password: Registered password is necessary for ADSL connection.
LAN
IP: Register IP address that is assigned for DVR.
Gateway: Register Gateway that is assigned for DVR.
34