Filter
Top Products
Figure 3.6.1. SYSTEM Setup Screen
Table 3.6.1. Menu items in SYSTEM Setup screen
Item Description
DVR ID
Set the name of the DVR.
Press the SEL button, use the LEFT and RIGHT or UP and DOWN arrow
controls to navigate through the position for each alphanumeric character and
Press SEL to apply the selected character. And Press OK to confirm the name.
SPACE / Caps Lock(Select either Capital or Lower letter)
BS(Back space: Erase previous character) / Clear(Erase all characters)
DESCRIPTION
Press SEL to view system information.
(System version, storage capacity, IP address and MAC address.)
LANGUAGE
Set the desired language.
DATE FORMAT
Set the desired date and time display format. Options are:
YYYY/MM/DD MM-DD-YYYY DD-MM-YYYY
SET DATE&TIME
Set the present date, time and daylight saving for the DVR.
DATE & TIME
Set the present date and time for the DVR. Press SEL, then use the LEFT and
RIGHT arrow controls to navigate through the position of each alphanumeric
character in the date and time. Use the UP and DOWN arrow controls to change
the selected character. Press ESC and select YES to confirm the new date and
time.
DAY LIGHT SAVING
Set the DLS (Daylight Saving) for the area.
The options are:
USA
EU
Others
OFF.
1. USA (DLS time is applied automatically when being on the DLS time
zone and is displayed on the current time)
2. EU (Set the GMT area for DLS time apply on the current time)
- GMT AREA +00:00
3. OTHERS
- BEGIN (MAR/1
ST
/SUN/00H)
- END (SEP/1
ST
/MON/00H)
(Set the BEGIN and END time for the specific area except EU and USA) use the
30