Memorex MT2025D CRT Television User Manual


 
9
ANTENNA CONNECTIONS
OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED)
Follow the instructions for the type of antenna system you intend to use. If using Cable or satellite, see the previous page.
Combination VHF/UHF
Antenna (Single 75 ohm cable
or 300 ohm twin-lead wire)
Separate VHF/UHF Antennas
Combination VHF/UHF
Antenna (Separate VHF and
UHF 300 ohm twin-leads)
Connect the UHF twin-lead wire to a
combiner (NOT SUPPLIED). Connect
the VHF twin-lead to a 300-75 ohm
matching transformer (NOT SUPPLIED).
Attach the transformer to the combiner.
Attach the combiner to the antenna jack.
Connect the 75 ohm cable from the VHF
antenna and the UHF antenna twin-lead
wire to a combiner (NOT SUPPLIED).
Attach the combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-
lead wire, use a 300-75 ohm matching
transformer, then connect the
transformer to the combiner.
Connect the 75 ohm cable from
combination VHF/UHF antenna to the
antenna jack.
OR
If your combination antenna has a 300
ohm twin-lead wire, use a 300-75 ohm
matching transformer (NOT SUPPLIED).
CONNECTION USING THE SIDE AUDIO/VIDEO IN JACKS
The optimal use for the side A/V jacks are to connect an A/V component that is used only occasionally, such as a
camcorder or video game. Connect the Audio/Video output jacks of the external unit to the Audio 2 Input jacks and the
Video 2 Input jack.
To access the unit connected to
these jacks, press the INPUT
button repeatedly until AV2
appears on the screen.
To
resume normal TV viewing,
simply press the INPUT
button
repeatedly until the TV channel
appears in the display.
AUDIO/VIDEO Cord
(Not Supplied)
EXTERNAL SOURCE
(i.e. camcorder, video game)
FAQs:
My external unit has only 1 audio jack, but this unit has two
Audio Input jacks, how do I connect it?
Simply connect it to the “L
(Mono)”
Audio Input jack, but the sound will be monaural.
How do I watch the external unit connected to the Audio/Video Input jacks?
Press the INPUT button repeatedly until AV2 appears on the screen, then start the external source.
Are the cables included?
No, the cables are sold separately
, visit your local electronics store.
RECEIVING ATSC CHANNELS
You can connect to an outdoor antenna to receive the free ATSC digital channels.
The size of the antenna you will need will depend on how far away the television station broadcast antennas are
from you. The further the distance the larger the antenna you need. If your unsure of how far you are you can go
to http://www.antennaweb.org and put in your zip code to search their database for your distance and the direction
of the broadcast antennas. If you’re fairly close you may be able to get away with just a small antenna that will sit
on top of your TV set. If you need a larger antenna you can either put one in the attic or outside on an antenna
mast.