Filter
Top Products
15
Connecting to TV
1. Connect antenna cable to AIR/CABLE jack of DTV Tuner
unit. Refer to previous section “Antenna /RF Connections”.
2. Connect video cable from VIDEO jack to the TV video
(CVBS) input.
3.
4.
Connect audio cable from R-AUDIO-L jacks to the TV
stereo (L/R) audio inputs.
Optional:
If the TV does not have AUDIO/VIDEO input
connectors, then connect one end of a coaxial RF cable to
the RF OUT connector on the back of the PHD-089 DTV
Tuner. Connect the other end of the coaxial RF cable to the
antenna input connector
on the back of the TV.
Set the
CH3/CH4 on the menu to the channel not used in your
area. (See page 26). It is this channel you will select on
your TV to view the digital programming with DTV Tuner.