Filter
Top Products
23
ENGLISH
This unit applies to DVD discs from Region 1 or Region ALL.
The loaded Disc (DVD, Audio-CD and MP3-CD) will be recog-
nized automatically.
The suitable Disc-formats are: DVD, CD-R and CD-RW.
Some CD-R/RW discs may be incompatible.
Do not play DVD-ROM, DVD-Audio, CDV, Video-CD, CD-G or
Photo CD to prevent accidental erasure of prerecorded material.
This unit cannot record disc material in DVD, Audio CD etc.
onto a video tape.
If you press REC/OTR during DVD playback, a symbol mark
" " will appear on the screen for aprox.4 seconds.
Title
When two or more movies are recorded on a disc, the disc is
divided into two or more sections. Each section is called a
“TITLE”.
Chapter
The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.
Track
An Audio CD can contain several items.
These are assigned to the tracks.
TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5
CD
Removing Disc from Case
Be sure to hold the edge of disc. Do
not touch the surface of the disc.
Pick up the disc gently from the
case.
• Do not scratch the disc.
• Do not get dirt on the surface of
the disc.
• Do not stick a label or adhesive
tape on the disc.
• Do not drop or bend the disc.
Storing Disc
• Store the disc in the case to
avoid risk of scratches, dirt or
damage.
• Do not leave disc exposed to di-
rect sunlight or in hot or humid
places.
Cleaning Disc
Wipe the disc with a clean, dry
cloth from center to edge.
• Do not wipe the disc round.
• Do not use liquid or aerosol cleaners.
Disc
Audio-CD
Setting setup language
4
The setup language can be selected.
Press
or ENTER
and then press or
to select desired
language (e.g.
English), then press
ENTER.
2
Press SETUP in the
stop mode. The SETUP
MENU of DVD will ap-
pear on the screen.
Then press to select
“Other”.
To make the SETUP screen disappear, press SETUP (or
RETURN).
If the DVD/VCR does not operate properly: Static electric-
ity, etc., may affect the player's operation. Disconnect the AC
power cord once, then connect it again.
3
Press or ENTER to
select “OSD Language”.
1
Press VCR/DVD to se-
lect the DVD mode.
(The DVD indicator will
light)
“No Disc” will appear on
the screen. (If a DVD
disc has already loaded,
the playback will start
automatically.)
OSD Language English English
Francais
Espanol
/Enter/Setup/Return
Language Picture Parental OtherSound
OSD Language English
/Enter/Setup/Return
Language Picture Parental OtherSound
/Enter/Setup/Return
Language Picture Parental OtherSound
Reading
Disc playback operation
5
2D81121A[E] (18-23) 6/4/04, 18:1923