Filter
Top Products
30
UNLOADING
1
2
NOTES:
Use only video cassette tapes marked .
LOADING AND UNLOADING VIDEO CASSETTE TAPES
1
The clock display will change in the counter display.
To unload a cassette, press the EJECT button on the
remote control, or press the STOP/EJECT button on
the VCR twice. The first press will stop the tape in
any mode. The second press will eject the tape. The "
"
will appear on the screen. The EJECT indicator will light in
the display.
AUTOMATIC EJECT
If the VCR automatically rewinds the tape to the beginning
(AUTO REWIND FEATURE), the tape will be ejected
automatically (See the NOTE on page 37).
EJECT
OR
STOP/EJECT
Pull the cassette out.
The counter display will change to the clock display.
Always eject the tape when not in use.
The cassette can be ejected even if the POWER switch is "OFF".
•
•
Push the center of the tape until it is automatically retracted.
AUTOMATIC POWER ON
The VCR will turn on automatically and the POWER indicator will light.
AUTOMATIC PLAY
When loading a cassette tape without the erase prevention tab, playback will start immediately.
LOADING
Insert the cassette with its labeled side facing
you. An inverted cassette cannot be inserted.
2
4C80401A-E(P30-33) 25/2/99, 21:2730