Filter
Top Products
35
ENGLISH
VHF/UHF/CATV CHANNELS
POWER
EJECT
TV/VCR
COUNTER RESET
INPUT SELECT
REC/OTR
SLOW
SPEED
MENU
–+
–
+
SET
SKIP
SEARCH
CLOCK/
COUNTER
–+
TRACKING
AUTO
CANCEL
ENTER
STOP
PLAY
F.FWD
REW
TIMER REC
PAUSE/STILL
CHANNEL
CALL
1
2
3
456
78
0
9
RECORDING AND VIEWING THE SAME TV PROGRAM
NOTE:
Since the VCR has its own TV tuner, it is not actually necessary to have the TV turned on in order to make a
recording. Turning on the TV merely allows confirmation of the proper channel settings on your VCR.
CHECK BEFORE YOU BEGIN
•Turn ON the TV and set to the video channel 3 or 4.
•Turn ON the VCR POWER button.
•Press the TV/VCR selector button to select the
VCR mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
2
UHF
14-69
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100)(125)
01
(5A)
TV
CATV
VHF
2-13
VHF
2-13
RECORDING A TV PROGRAM
1
2
3
The clock display will change in the counter display.
Load a cassette tape with the erase prevention
tab intact.
The VCR will automatically turn on.
Press the SPEED selector button to select the
desired tape speed SP, LP or SLP.
The counter and SP, LP or SLP will appear on the
screen about 4 seconds.
00 : 00 : 00 SP
SPEED
Press the direct channel selection buttons or the
CHANNEL ▲ or ▼ button to select the channel to
be recorded.
1-9
10-19
20-99
100-125
Press 0 twice and then 1-9 as required.
(Example; to select 2, press 002.)
Press 0 first and then the remaining 2
digits in order from left to right.
(Example; press 018 for 18.)
Press 2 digits in order. (Example; press
22 for 22.)
Press the 3 digits in order. (Example;
press 110 for 110.)
CH 110
3
1 1 0
CHANNEL
or
4C80401A-E(P34-39) 25/2/99, 21:4235