Filter
Top Products
38
POWER
EJECT
TV/VCR
COUNTER RESET
INPUT SELECT
REC/OTR
SLOW
SPEED
MENU
–+
–
+
SET
SKIP
SEARCH
CLOCK/
COUNTER
–+
TRACKING
AUTO
CANCEL
ENTER
STOP
PLAY
F.FWD
REW
TIMER REC
PAUSE/STILL
CHANNEL
CALL
1
2
3
456
78
0
9
Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1 month.
NOTE:
Turn on the TV and set to the video channel 3 or 4.
Press the TV/VCR selector button to select the VCR
mode.
Load a video cassette with the erase prevention tab
intact. The VCR will automatically turn on.
Check that the clock and date are correct (see page
25).
•
•
•
•
CHECK BEFORE YOU BEGIN
2
SETTING THE TIMER RECORDING
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
EXAMPLE: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1. (Tape speed: SLP)
3
Press the SET + or – button to select the date,
then press the ENTER button.
1
To set the timer for other programs, press the MENU button. Check that the TIMER REC SET option is
selected, then press the ENTER button. Press the SET
+ or – button until the next program blinks, then
press the ENTER button. Repeat steps 3 to 4 to set the second program.
32
321
1
Press the MENU button. Check the TIMER REC
SET option is selected, then press the ENTER
button.
〈
+
/
–
/ENTER/MENU
〉
MENU
TIMER REC SET
CH SET UP
AUTO REPEAT ON OFF
SYSTEM SET UP
NO NOISE BACKGROUND
MENU
ENTER
Press the SET + or – button to select the one of
the program line, then press the ENTER button.
–+
SET
ENTER
–+
SET
ENTER
〈
+
/
–
/ENTER/CANCEL/MENU
〉
TIMER REC SET
DATE
START
END
CH
SPEED
26
12
(WED)
: 00 AM
:
– –
1
SP
– –
〈
+
/
–
/ENTER/CANCEL/MENU
〉
DATE START END CH
––––– ––:–– ––:–– –– –
––––– ––:–– ––:–– –– –
––––– ––:–– ––:–– –– –
––––– ––:–– ––:–– –– –
––––– ––:–– ––:–– –– –
––––– ––:–– ––:–– –– –
––––– ––:–– ––:–– –– –
––––– ––:–– ––:–– –– –
4C80401A-E(P34-39) 25/2/99, 21:4238