Metz 30 TL 55 Flat Panel Television User Manual


 
6
The Metz Remote Control RL 18 can be
used to control the TV set and the basic
functions of video recorders VCR1 and
VCR 2, a DVD player and HiFi units (such
as radio, cassette player, CD player,
amplifier, etc.) made by Metz or various
other manufacturers.
The remote control sends the commands to
the TV set with the aid of infrared radia-
tion. Always point the remote control at
the TV set when using it. The remote con-
trol may occasionally interfere with the
operation of other infrared-controlled devi-
ces or systems (such as infrared headpho-
nes) within its range.
Ensure that no sunlight falls directly
on the TV set, since this may result in
malfunctions because the set cannot
detect the infrared signals from the
remote control.
Note that the TV set must be switched on
with the mains switch before it can be con-
trolled with the remote control.
The various operating levels of the remote
control are programmed as follows in the
factory:
TV Metz TV sets 30TL55
VCR1 Metz VCR with remote control RH51
VCR2 Metz VCR with remote control RF52
DVD Metz DVD player with remote control
RG/RH37
HiFi
Metz HiFi CD receiver HE 11 with remote control
F11
3. The remote control
21
22
23
Do not
use rechargeable batteries in
the remote control.
Use only two dry batteries of the type
LR03/ AM4/AAA 1.5V Micro.