Filter
Top Products
17
4.6 First-Time Settings
Automatic station search
• Press the TV key ቲ to switch on the monitor.
• Press the MENU key (8) to open the TV menu.
• Use the cursor key ̈ to move to the sub-menu "Inputs".
• Use the cursor key ̄ to select "Setup".
• Use the cursor key ̈ to move to the sub-menu "Settings".
• Use the cursor key ̈ to move to the sub-menu "Auto. Search".
• Use the cursor key ̈ to move to the settings for the "Auto. Search".
• Set the TV standard, if necessary, by using the cursor keys ̈ and ̄ to select the desired standard and pressing
the cursor key ̇ to accept it.
• Set the search mode:
a. All stations: the search places all receivable stations in the station table and sorts them.
b. New stations: the search adds all stations which are not yet in the station table and sorts them.
Use the cursor key ̄ to move to "Search mode" and press the ̈ key to activate it. Then use the cursor key ̄ to
select the desired search mode and press the cursor key ̇ to accept it.
• Define the starting position: use the cursor key ̄ to select "First programme position" and activate it with the ̈
key. Then enter the desired first programme position with the numeric keys 0-9.
• Start the search: use the cursor key ̄ to select "Start search" and press the cursor key ̈ to start the search.
• The tuner now searches for stations, places them in the station table and sorts them. The search can be stopped
at any time by pressing the red key.
• After completion of the search, the monitor is set to programme position 1 and the station table is closed.
• You can open the station table with the white key.