Filter
Top Products
22
To make your own individual settings, select the option "USER".
Mute function
• Press the key on the remote control. The sound is muted and the following info window is displayed on the
screen for about three seconds:
• To switch the sound on again, press the key again or press the – (Vol -) or + (Vol +) key ቫ on the remote
control. The following info window is displayed on the screen for about three seconds:
5.3 Adjusting the Picture
You can adjust the contrast, brightness, sharpness and colour of the picture to any desired values.
• Press the ̆ key to increase the value or the ̄ key to decrease it.
• The setting "SHARPNESS" permits you to adjust the sharpness of the picture.
• The menu item "COLOUR" (not available in PC mode) permits you to change the colour intensity:
Hue (available only for an RGB input signal via Scart1)
If you wish to change the hue of the picture delivered via the AV programme position "Scart1", select the menu
item "Hue". Pressing the cursor key ̆ will make the picture greener, and pressing the cursor key ̄ will make it
redder. In this case, the colour control has no effect.
DNC (Digital Noise Control)
In the case of a very noisy signal, the background noise can be reduced with the DNC function.
Photo CD (not available in PC mode)
The appearance of still pictures such as JPEG photos from a DVD player can be optimised by setting "Photo CD"
to ON.
Interlace
When using signal sources which generate non-interlaced signals, better results may be obtained by setting this
function to OFF.
TUNER: 2 ZDF
MUTE
TUNER: 2 ZDF
STEREO