Filter
Top Products
-49-
PC Mode
Installation
• Power off b oth Computer and Display before
making any connections.
• Set your PC’s resolution correctly before
connecting to the TV. See the table on page
56 for supported modes.
• Use a D-SUB cable to connect the TV’s PC
input to the c omputer’s RGB output termi-
nal.
15 Pin MiniD-Sub Connector
• T ighten the screws of the Display cable until
the connectors are fastened securely (fin-
ger-tighten only).
In TV mode, you can directly enter the PC
mode v ia pressing the PC button.
Menu Syst em in PC mo de
Press the M button. The menu will be dis-
played in the middle of the screen.
PC Picture Position Menu
By pressing
_
/
`
button, select t he first icon.
PC Picture Position menu appears on the
screen.
Autoposition
H Position
V Position
Dot Clock
Phase
50
50
50
50
PC PICTURE POSITION
Autoposition
If you shift the picture horizontally or v ertically
to an unw anted position, use this item to put
the picture into correct place automatically.
• Select Autoposition item by using
a
/
b
buttons.
•Press
`
or “ OK ” button.
Warning: Auto positi on adjus tment recom-
mended to be done w ith the f ull scr een im-
age for the proper adjustment.
H (Horizontal) Position
This item shifts the image horizontally to
right hand side or left ha nd s ide of t he
screen.
• Select H Position item by using
a
/
b
but-
ton.
•Use
_
/
`
button to adjust the value.
V (Vertical) Position
This item sh ifts the image vertically towards
the top or bottom of the screen.
•SelectV Position item by using
a
/
b
but-
ton.
•Use
_
/
`
button to adjust the value.
Dot Clock
Dot Clock adjustments correct interference
that appear as vertical banding in dot inten-
sive pres entations lik e s preadshee ts or
paragraphs or tex t in smaller fonts.
•Use
_
/
`
button to adjust the value.
Phase
Depending on the resolution and scan fre-
quency that you input to the TV Set, you may
see a hazy or noisy picture on the screen. In
such a case you can u se this item to get a
clear picture by trial and error method.
•Use
_ / ` button to adjust the value.
PC Picture Menu
By pressing
_
/
`
button, select the second
icon. PC Picture menu appears on the
screen.