Filter
Top Products
-54-
Conne ct P eriphera l
Equipment
There is a wide range of audio and video
equipment that can be connected to your T V .
The following conne ction diagra ms show
you where the different (Optional) equipment
should be connected at the rear side of the
TV.
Your PLASMA Television is capable of dis-
playing High Definition pictures from devices
such as a High Definition Satellite Receiver
or DVD Player. These devices must be con-
nected via the HDM I socket (EXT-6) or Com-
ponent Socket (EXT-4). These sockets can
accept either 720p or 1080i signals.
Note: For proper connection of a device to
HDMI in put of your TV via using a DVI-to-
HDM I cable, use PC Audio In input for sound
connection.
Via T he Scart
Plasma TV has 3 Scart s ockets. If you want
to connect peripherals (e.g. video, decoder,
etc.) which hav e Scart sockets to the TV, use
SCART 1, SCART 2 or SCART 3.
If an external device is connected via the
Scart sockets, the TV will be switched to AV
mode automatically.
• Do not connect Digital Set Top Box devices
viaScart1.UseScart2.Use Scart 3.
Via A erial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have a
Scart socket , you should connect it to the
Aerial input of the TV.
If the VCR is connected via Aerial input it
is suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of
programmes. Most of them are free, others
are to be paid for by the view er. This means
that you will need to subscribe to the broad-
castin g orga nisa tion whose pr ogramm es
you wish to receive. This organisation will
supply you a co rresponding decoder unit to
allow the programmes to be unscrambled.
For f urther information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a Scart
cable to SCART 1 .
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to SCART sock-
ets.
Playback NTSC
To use this option you can;
• Connect an NTSC VCR player to a Scart
socket at t he rear side of the TV.
• Connect an NT SC VCR pl ayer to RCA Jacks
at t he rear side of the TV.
Then, press
AV
button to select appropri-
ate source.
Copy Facility
Source selection for VCR recording.
• Select Feature menu.
• Select Ext-2 Out by pressing
_
/
`
button.
• Select a source to copy the picture from that
source.
Search For And Store The Test
Signa l Of The Video Rec or der
• Unplug the aerial cable from the aerial
socket of your video recorder .
• Switch on your T V and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
• Enter the Install menu and select search.
• Search for the test signal of your video re-