Filter
Top Products
37
In the case of TV sets with one front end, the pic-
ture in picture function (PIP) can only be used for
the superimposition of an AV set.
In this regard, the following superimposition
options are possible:
If an analogue TV station is displayed on the
screen, it is only possible to call up the picture of
an AV set, which is connected either to the
“HDMI” or the “DVI-D” socket.
If a digital TV station (DVB-C or DVBT) is display-
ed on the screen, it is possible to call up the pictu-
re of any AV set, regardless of the socket it is con-
nected to.
In the case of TV sets with two front ends, it is
possible to call up a different analogue program-
me or the picture of any AV set, regardless of the
socket the set is connected to.
Activating the PIP function
• The F1 key is pre-programmed with the picture-
in-picture function.
• You can use the cursor control keys
̇̈to move the PIP picture on the
screen. The last position to which this
picture was set is saved.
• By pressing the "OK" key, you can set
the frame of the PIP picture to active
(red) or inactive (white).
• The contents of the PIP picture can be
changed only if its frame is active
(red). If this is the case, you can use
the numeric keys or the "P+/P-"
rocker key to select a different AV
programme position.
17. Special Functions
Picture-in-Picture
Opening the menu
F1
606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 37