Filter
Top Products
68
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
25. Registering AV Devices
Setting signal types DVI/HDMI
The signal type always refers to the input
and output of the AV device.
AV devices equipped with a DVI or HDMI socket
can be connected to the LCD TV with the aid of a
DVI or HDMI cable, respectively.
The connected device must be registered in the
menu "AV devices" with "Signal OUT" set to
"DVI" or "HDMI", as applicable. Connection via a
DVI or HDMI interface permits digital transfer of
the picture signal from the device to the TV set.
The sound signal must be connected with an addi-
tional Cinch or optical (Toslink) audio cable.
Setting the signal type DVI or HDMI
• Press the "MENU" key to open the TV menu.
• Press the yellow key to open the
menu "AV devices".
• Use the cursor control key to select
the AV device whose signal type you
wish to change and press the "OK"
key.
• Press numeric key
·, use the cursor
control key to select " Signal OUT",
and use the - + key to change the set-
ting to " RGB".
• Press the "OK" key to confirm your
selection.
• Press the "EXIT" key to close the TV menu.
Caution ! This may cause an existing con-
nection diagram to be modified. If so, you
must reconnect the AV devices accordingly.
☞
☞
Other device 3
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.3
DVD/Videorec.2
DVD/Videorec.1
SignalOUT HDMI Signal IN CVBS
Change with .
Accept value with
.
OK
– +
F1
➔
DataLogic
Name
Signal types
Connect
✗
✗
MENU
OK
ᕢ
OK
EXIT
Opening the menu
606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 68