Metz MF 72TK80, MF 72TK81, MF 72TK86, MF 82TK96, MF 82TK97, MF 84TK89 CRT Television User Manual


 
47
22. AV devices
Call the menu
MENU
OK
OK
AV (Audio/Video) devices are devices which
provide picture and/or sound signals for play-
back on your TV set (for example, video cas-
sette recorders, DVD players, etc.).
In the menu „AV devices“, the setting window
displays a list of all common AV units.
Always connect AV devices exactly as
shown in the connection diagram in the TV
menu of your TV set!
SVHS/Hi8 and Data Logic video recorders must
always be connected as „Video recorder 1“. A „nor-
mal“ VHS video recorder may be connected as
„Video recorder 1“ or „Video recorder 2“.
Connecting AV devices
• Press the „MENU“ key to open the TV
menu.
• Press the yellow key to open the
menu „AV devices“. Some of the
EURO sockets are pre-programmed in
the factory (see the picture on the
right). If you want to change these set-
tings, you can select one of the AV
devices with the cursor control key and
delete it by pressing the ll key.
• Use the cursor control key to select the
device you wish to connect to the TV set.
• Press the „OK“ key to confirm your selection
and, in the setting window, set the parameters
„Signal OUT“ and „Signal IN“ to match the AV
device (see the operating instructions for the AV
device for details).
• Press the „OK“ key. The newly connected device
appears in the connection diagram.
Caution: connecting a new device may
cause an existing connection to be modi-
fied. If this happens, you will have to move
the cables for the affected AV device to the
correct positions.
i
Select a new device:
DVD/Videorec.1 1 DVD Satellite / SetTop
DVD/Videorec.2 Decoder
Camcorder/Photo
AV-Receiver / CD PC Other device
Picture-Volume
AV de
Station table
Timer
Configuration
TV-Menü
AV devices
Connect as follows:
Back of TV set
Front of TV set *
DVD player
Camcorder/Photo
Select device
with and
call device at-
tributes with OK
SVHS/Hi8
RGB
DVD/Videorec.1
FBAS
Euro1
Euro2
Euro3
Data Logic
  