Filter
Top Products
65
28. Sat timer recording
If your TV set is equipped with a satellite receiver,
you can use the“Sat timer recording“ menu in the
TV to.record satellite programmes on your video
recorder.
• Press the „MENU“ key to open the TV menu.
• Press the green key to open the menu
„Timer“.
• Use the cursor control key to select „Sat timer
recording“.
• Press the „OK“ key and then use the cursor
control key to select one of the timers.
• Press the „OK“ key and then, in the
setting window, use the numeric keys
to enter the programme position and
the start and end times*. Use the
–
+
key to select the recording device.
• Press the „OK“ key to save the set-
tings.
• Press the „TV“ key to close the menu.
If you have a Data Logic video recorder,
the TV set will automatically start the
recording on the video recorder at the
specified time. If you have a standard video
recorder, you must also programme the recording
on the video recorder. In this case, specify as the
source the AV programme position (e.g. AV1) to
which your TV set is connected.
For VPS recordings, the TV set switches to the
recording state one hour before the specified start
time, so that it can react if the programme you
want to record starts earlier than planned. If you
have programmed a timer recording, do not
switch off the video recorder with its main switch.
Possible only if a satellite upgrade kit is installed!
Call the menu
MENU
OK
OK
* Please note, for VPS recor-
dings, that you must enter the
VPS start time as the start
time for the recording.
Time settings
Timer control
Reminder
Childlock
Sat timer recording
Program Date Time of day Device VPS
25 30.01. 20:15-21:00 Videorecorder
VOX
Change device
with + and -
Picture-Volume
AV devices
Station table
Timer
Configuration
Timer 8
Timer 7
Timer 6
Timer 5
Timer 4
Timer 3
Timer 2
Timer 1
TV-Menü
Timer