Mintek High Definition Personal Video Recorder VCR User Manual


 
ADJUSTING
THE VOLUME
32
AUDIO SIGNAL EMITTED BY YOUR TERMINAL
By adjusting the volume on your TV, you determine the loudness of the sound coming from your speakers. With
illico, however, the VOLUME feature adjusts the power of the audio signal coming from your terminal. This signal
then enters your TV or audio system
at the programmed level. This is why it is important to keep the power of
the audio signal coming from your illico terminal at
maximum level.
PROGRAMMING YOUR REMOTE CONTROL
You must program your illico remote control to control the sound from the TV speakers rather than the power of
the audio signal coming from the terminal. To do so, you first need to program your remote control to turn the TV
on/off. Then, depending on the
model, follow the instructions for programming the remote control to control the
TV volume (reference: remote control section
of this guide).
SETTING ILLICO LEVELS FOR BETTER SOUND QUALITY
There are three main settings.
To access the general settings menu, press SETTINGS twice on your illico remote control. Once in the GENERAL
SETTINGS menu, follow the instructions below:
A. In the menu on the left, select AUDIO: DIGITAL OUT using the up/down arrows. Go to the right and, using the
arrows again, select DOLBY DIGITAL. Press to confirm your selection.
B. In the menu on the left, select AUDIO: RANGE using the up/down arrows. Go to the right and, using the arrows
again, select NARROW. Press to confirm your selection.
C. In the menu on the left, select AUDIO: VOLUME CTRL using the up/down arrows. Go to the right and, using the
arrows again, select FIXED. Press to confirm your selection.
Naturally, for impeccable sound quality, your TV or home theatre speakers have to be in good condition. Also, be
sure to use top-quality speaker wires. In addition, if your home theatre has an AC-3 input, we recommend you use it
because illico is AC-3 enabled. If you are watching a program in this format, you will get superior quality sound,
provided your equipment has been set accordingly.
ADJUSTING
THE VOLUME