Filter
Top Products
5 Press key 1.
– The mode light will blink twice to confirm
that the VCR volume controls are assigned to
TV.
• If the mode light blinks once for a longer
time, the volume assignment failed.Try again
from step 1.
Add a specific function to your remote control
In case you miss a specific function on the remote control and you can not
learn the function from your original remote control, you can contact our
Helpline to ask for a 5 digit code to add the missing function to the RU760.
(You can find the telephone number on page 145).
1 Select the required mode with the SELECT key.
2 Press keys 1 and 6 of the RU760
simultaneously for 5 seconds until the label
of the selected mode blinks twice and then
remains lit.
3 Press keys 9, 9 and 4, in that order.
4 Enter the 5-digit code you have received from our helpdesk.
5 Press the key under which you want to store the new function.
– The label of the selected mode blinks twice to confirm that the function
is stored.
• If you store the function on a key that already had a function, the
original function will be lost.You can reset the original function with
‘Reset a key’ as described on page 11.
Restoring all original functions
To revert the RU760 back to the factory default settings, do the following:
1 Press keys 1 and 6 simultaneously for
5 seconds until the label of the selected
mode blinks twice and remains lit.
2 Press keys 9, 8 and 1, in that order.
• The mode light will blink twice to confirm a
succesfull reset.Your remote is now reverted
to the state it was when you first took it out
of the packaging.
TV
VCR
DVD
AUX
TUNER
CD
123
456
789
SHIFT
0
VCRDVDSAT AMPCD
LEARN SELECT GUIDE
TITLE AUDIO CHAPTER SUBTITLE
AUX
TUNER
CD
123
456
789
SHIFT
0
TV
VCR
SOURCE
DVD
AUX
TUNER
CD
123
456
789
SHIFT
0
TV
VCR
SOURCE
DVD
AUX
TUNER
CD
123
456
789
SHIFT
0
13
Instructions for use
English
RU760.qxd 04-06-2004 16:59 Pagina 13